We are involved in offering
geotextiles that are used in landfill process. The non-woven geotextiles
are manufactured from high quality polypropylene staple fibers and are
mechanically bonded through needle-punching to form a strong, flexible
and dimensionally stable fabric structure, with optimum pore sizes and
Ask for Price
These geotextiles are resistant to chemicals and biological organisms
normally found in soils and are stabilized against degradation due to
short-term exposure to ultraviolet radiation.
What is Landfill?
Landfill is the process of disposing off the
waste material that is environmentally acceptable and is considered
better for the environment. The holes are dig in the land then barriers,
filters and liners are placed in those holes, put in trash and cover
with soil. These filters and liners works as barriers and does not allow
pollution to seep into the ground, thus reduction in the scavenging
Recommended Specifications For Geotextile
Separation Layer To Be Used In Landfills:
- 285 gsm,
- 285 or 400 gsm
- 800 gsm
- 1200 gsm
Landfill Daily Cover
- A landfill daily cover helps control and prevents disease, fire,
odor, blowing litter and scavenging in landfills. It is also
expected to control dust, improve general site aesthetics and act as
a moisture barrier to limit excess precipitation from entering
- Soil is most commonly used as a daily cover, but it may be in
short supply and expensive to transport. It consumes landfill space
(up to a 6-inch layer over the working face every day) that could be
used for waste disposal. Additionally, wet weather conditions can
complicate the use of soil.
- Geotextile is an ideal reusable daily cover material. Ease of
handling allows Geotextile to be quickly installed and removed on a
daily basis (Even in cold, wet weather), thus consuming no landfill
space. Its smooth surface makes it slide easily over compacted
refuse, and its tight fiber structure sheds excess precipitation.
Geotextile can be used over and over again.
Non-woven Nonwoven Geotextiles conforms to the
following property values.
Standard Product Range of "J" Products
Recommending for Geotextile Separation Layer
2009. The values are average roll values in which all the
properties are having -10% tolerances. Water Permeability, Elongations
are having -30% tolerance and AOS have + 30%. The information given in
this data sheet is based on tests conducted at our in-house laboratory
and independent accredited laboratories.
The information is presented as a true and accurate representation of
the attributes of the products to the best of our knowledge, no
expressed or implied warranties are made and Jeevan Nonwoven assumes no
responsibility or liability with regard to the use of this information.
The right to make periodic revisions of the specifications without prior
notice is reserved.
|MASS PER UNIT AREA
|ELONGATION @ BREAK
|STANDARD ROLL DIMENSIONS